Features:
The Peavey PR 12D is a powered, bi-amplified, two-way speaker system engineered to provide very high levels of performance in a compact powered loudspeaker. The PR 12D is capable of up to 120 dB peak SPL. the enclosure utilizes tough polypropylene in an injection-molded plastic trapezoidal form, with a coated steel grille to offer an attractive yet-durable powered speaker system. This two-way powered system is comprised of a 150 W class D power amplifier driving a 12" heavy duty woofer. The RX
TM 14 compression driver is driven by a 50 W class D power amplifier and features a 1.4" titanium diaphragm coupled to an extremely smooth and well-controlled constant directivity horn (with a coverage pattern of 90" by 40") that is molded integrally into the enclosure. A balanced input to the preamp/EQ electronics consists of one combo female XLR and 1/4" TRS phone jack. It is switchable between mic-level and line-level sensitivity. Two 1/4" phone jacks are provided for link-out / direct-in capability. The link-out is a post-level and pre-crossover. While the direct-in is a circuit pre-crossover input. A woofer servo senses back-EMF from the woofer voice coil that is not a result of the dirve signal, and subtracts the error so that the woofer cone follows the drive waveform precisely. constant Loudness (Fletcher-Munson) circuit for accentuating bass and treble at low listening volume levels. The power amplifiers providing the bi-amplification are low-distortion units providing 150 W continuous RMS into the nominal 8 ohm load of the woofer, and a 50W continuous RMS into the nominal 8 ohm load of the tweeter. They were selected for their reliability and superb musical performance capability. both amplifiers feature out patented DDT
TM compression, which virtually eliminates audible power amplifier clipping. A molded-in handle provides ease of transport, while multiple mounting points (top and bottom) for the Peavey Versamount
TM allow maximum utility.
Features
Bi-amplified Class D powered system with 200 watt total power
Both power amps have DDT compression
12" heavy duty woofer with 2.375" voice coil and Neodymium Magnet
Woofer servo for reduced woofer distortion
Automatic equal loudness (Fletcher-Munson)
RX 14 1.4" titanium compression driver
Peak SPL up to 120 dB with music!
Combo jack with 1/4" TRS & female XLR mic- or line-level balanced input
Two 1/4" phone jacks for link-out/direct-in capability
Molded-in horn with exceptionally smooth response and pattern control
Top and sides handgrips
Pole mount molded-in
Reduced weight
Top and bottom flying point inserts
Weight Unpacked: 28.66 lb(13 kg)
Weight Packed: 34.39 lb(15.6 kg)
Width Packed: 20.75"(52.705 cm)
Depth Packed: 25.25"(64.135 cm)
Height Packed: 16.25"(41.275 cm)
| Model: |
PR12D |
| Manufacturer: |
Peavey |
